DatoHome L-B200, User Manual

Need Help? Contact Customer Support

Visit: https://www.datoaihome.com/pages/technical-support.

Email: service@datoiot.com. 

a. Activate the 'setting'-mode by rotating the mechanical key clockwise about 15-20 degrees.

b. Hold for about 5 seconds until a red indicator light flashes.

c. Release the mechanical key. All fingerprints will be removed after a long beep (restore factory default)， and ANY 

    fingerprint can now open the door.

2 Remove fingerprints

a. Press your finger on the fingerprint scanner. If the fingerprint is verified, the blue indicator will light shortly with 1 

    beep and the motor will trigger the door to open (changing to 'unlocked' state). Now you can turn the handle and 

   open the door. The 'unlocked' state will last for 6 seconds.

b. If the fingerprint is not verified， the red indicator will tick two times with 2 beeps. You cannot enter. Register your 

    fingerprint profile to enter.

3 Unlocking with fingerprint identification

a. Remove the plug that covers the mechanical key insertion-hole with the key-hole cover pin attached to the keys.

b. Insert the mechanical key and turn counterclockwise about 45 degrees to open the door.

    Note: please take good care of the mechanical key， which is a necessary accessory for emergency opening    

    and settings management.

4 Emergency Mechanical Key for Unlocking

9