DatoHome L-B201, User Manual

7

Lock Operation

Use a microfiber cloth and wipe across the fingerprint reader surface. 

NOTE: THE FIRST 2 FINGERPRINTS ADDED ARE ADMINISTRATOR

. When 2 admin-user fingerprints have been 

          collected， adding new fingerprints will prompt normal-user fingerprint collection.

① Adding fingerprints

Method 1: Use pin to press the ﹃settings-button﹄ on the interior handle shortly. You﹂ll be asked to scan your   

                   fingerprint. Scan your fingerprint 6 times in sequence. Upon completion， LED will light blue for 2 seconds 

                   and lock will prompt ﹃Addition Success﹄

Method 2: Hold your fingerprint to scanner for about 10 seconds until you hear ﹃add administrator fingerprint﹄. Scan 

               new fingerprint 6 times. Upon completion， LED will light blue for 2 seconds and lock will prompt ﹃Addition 

               Success﹄.

* Please note the following factors may affect the fingerprint identification. 

1. Fingers are too dry， wet， oily or dirty. 

2.There is direct sunlight on the sensor.

Pin pressing the setting button