9
Need Help? Contact Customer Support
Visit: https://www.datoaihome.com/pages/technical-support
Service line : (929)336-6777
Email: service@datoiot.com
Test the lock:
Turn the thumbturn of the interior panel to check if the deadbolt protrudes and retracts smoothly.
Insert the mechanical key and turn to check if deadbolt moves smoothly. Program passcode and RFID-Card,
check if functional. Shut door to check if deadlock protrudes and retracts in and out of dust box and strike
plate smoothly. If not, please check installation steps or contact support.
If auto-locking is desired, please install the magnetic sensor or
set time to auto lock the door in the app.
① With Magnetic Sensor:
Route the wire through the square hole on the left side of the
mounting plate, and connect the magnetic sensor wire to the
"Magnet" socket on the PCB.
Attach the magnetic sensor to the door with either adhesive
tape or screws.
Attach the corresponding magnet to the doorframe, directly
across the point where the magnetic sensor is located when
door is shut.
② Without Magnetic Sensor:
Open the app --> setting --> automatic locking --> enable
Step 7:
Magnetic sensor
Magnet