3
OPERATION
• Only have repairs carried out by an authorized specialist dealer or suitably
• The electric shoulder pad may only be operated with its special control unit.
• DO NOT dry clean.
• Clean the shoulder pad by hand wash at maximum 30
˚
C (recommended).
• Machine wash the shoulder pad at 30
˚
C (maximum) with low mechanical
action and spin as high spin speed may damage the inner wirings.
• When storing the appliance, allow it to cool down before folding.When storing,
do not place any objects on the electric shoulder pad to prevent buckling.
Temperature settings
CLEANINg AND CARE
Automatic safety switch-off function
Level: 0=Off (without light indicator)
1=Low heat (with light indicator)
2=Middle heat (with light indicator)
3=High heat (with light indicator)
• Always disconnect the power plug from the socket outlet before cleaning the
electric shoulder pad.
• Before washing, unplug it from the mains outlet and let it cool down completely.
• Unplug the control switch unit from the electric shoulder pad using the connector
on the underside.
IMPORTANT:
Never immerse the power cable or the control switch unit in water
or liquid,it would cause irreparable damage not covered by warranty.
• Clean the shoulder pad by hand wash at maximum 30
˚
C (recommended).
The electric shoulder pad is automatically switched off after 90 minutes. To switch on
then after approximate 5 - 10 minutes select the desired temperature level.
IMPORTANT:
SWITCH OFF THE SHOULDER PAD WHEN YOU DO NOT
NEED HEATING.
Always disconnect the power plug from the socket outlet when you do not use.
DO NOT cover it with any material e.g. a quilt or pillow. Avoid applying pressure on
the switch.
• Connect the electric shoulder pad with the detachable power connector.
Plug the power cord into the mains outlet.
• The electric shoulder pad heats up quicker when you initially set to the high
temperature level.
• We recommend selecting the low temperature level when using the shoulder
pad for several hours.
• Put the electric shoulder pad on your shoulder and button up properly after the
desired temperature is reached.
