10
5.4 How to Mount to a Flat Surface (Wall or Ceiling):
1) Install the flat side of the Mounting plate on the wall or solid ceiling with wall screws and
anchors
2) Connect the Ethernet Cale to the Access Point Ethernet Port with 802.3AT PoE input
3) Alternatively you can supply power to the device using the 12V DC Power input
4) Install the I/O Port Cover and Gasket if installed outdoors
5) Install the Access Point on the mounting plate and lock into place
6) Attach Grounding Cable to the Grounding Point on the Access point and screw in
provided Grounding screw if installed outdoors