Datwyler IPDU-A Series User Manual Download

Page: 12 / 18

IPDU-A Series User Manual

User can revise the user name and password

，

the save it (the Max. length of user name and password is 16

digits.)

E. Networking Setting as figure 6

Figure 6

Networking Setting: System IP: 192.168.1.163 (factory default IP Address)

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

DNS: factory default is 202.96.128.86

Please ensure the DNS address is correct so that email can be sent out.

Note: Restarting software is necessary after a modification of the network settings.

F. SNMP Setting , see below figure 7

The default get community and Set community is “public” and “private”. User can modify according to the

specific application.

Fill in the trap address of SNMP management platform, trap alarm will be sent automatically. There are 2

Trap addresses.

Note: Restarting software is necessary after SNMP setting.

Telnet settings

Select from “Enable” or “Disable” to configure the Telnet feature, the default state is enabled.

Summary of Contents for IPDU-A Series



















Search results

Summary of Contents for IPDU-A Series

Reviews:

Related manuals for IPDU-A Series

Brands by name

Popular brands

Datwyler IPDU-A Series, User Manual

Search results

Summary of Contents for IPDU-A Series

Reviews:

Related manuals for IPDU-A Series

Brands by name

Popular brands