3. Automatic Watch
III. DAUMIER Watch Operating Instructions
Watch Model No: DM8602, DM8603, DM8607, DM-JLW002, DM-JLW004A,
DM-JLW008, DM-JLW009A, DM-JLW015A
Calibration steps that apply to movement model:
8215
A) DISPLAY
C) SETTING THE TIME
1. Pull the crown out to the 2nd click position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,second hand begins to run.
D) SETTING THE DATE
1. Pull the crown out to the 1st click position.
2. Turn the crown counter-clockwise to set the date.
* If the date is set between the hours of around 9:00 PM to 1:00 AM, the date may
not change the following day.
3. After the date has been set, push the crown back to the normal position.
B) WINDING THE MAINSPRING
Automatic winding watch can be also manual-winded by turning the crown in normal
crown position. Wind 15 - 20 times clockwise until second hand starts to move naturally.
Hour hand
Minute hand
Normal crown
position
1st click position
Second
hand
Date
2nd click position
16
