background image

3. Automatic Watch 

III. DAUMIER Watch Operating Instructions

Calibration steps that apply to movement model:

 

8205

 

     

 

 

Hour hand

Minute hand

Normal crown

 

position

1st click position

Second 

hand

Date

2nd click position

Day of the week 

C) SETTING THE TIME

A) DISPLAY

1. Pull the crown out to the 2nd click

 

position.

2. Turn the crown to set hour and minute hands.  

3. When the crown is pushed back to the normal position, second hand begins to run.
D) SETTING THE DATE

1. Pull the crown out to the 1st click position.

E) SETTING THE DAY OF THE WEEK

1. Pull the crown out to the 1st click position.

2. Turn the crown clockwise to set the day of the week.

 * If the date is set between the hours of around 9:00 PM to 1:00 AM, the day of the 

    week may not change the following day.

3. After the day of the week has been set, push the crown back to the normal position.

2. Turn the crown counter-clockwise to set the date.

* If the date is set between the hours of around 9:00 PM to 1:00 AM, the date may 

   not change on the following day.  

    

3. After the date has been set, push the crown back to the normal position.

Watch Model No: DM8601

B) WINDING THE MAINSPRING

Automatic winding watch can be also manual-winded by turning the crown in normal 

crown position. Wind 15 - 20 times clockwise until second hand starts to move naturally.

23

EN

G

LI

SH

Summary of Contents for DM9616











































Reviews: