DAUSCHER DCF-110Q, User Manual

7

2.2 

Temperature Control

速冻/锁定/解锁按键

调温按键

指示灯显示区域

高温报警指示灯

速冻指示灯

摄氏温度指示灯

华氏温度指示灯

温度显示区域

7

Super-freeze/Lock/Unlock key

Tempering key

Indicator lamp display area

High temperature warming indicator lamp
Super-freeze indicator lamp
Centigrade temperature indicator lamp

Fahrenheit temperature indicator lamp

Temperature display area

Display control

When power on the freezer , the display window will be on for 3s, and then it will enter normal 

operation display, the original electrified display shall be under 18

℃

;

Display of normal operation: 

 if there is no failure, the set temperature or function mode

will be displayed; 

 if there is any failure, the failure code will be displayed;

Show

sleep function: the sleep function will open by default after electrifying, after the

temperature 

is confirmed, the display will extinguish after another 30s.

The sleep mode could be switched via combined key: 

By pressing  the key

“        ”

 and 

“        ”

 for 5s simultaneously, when 

“  

ON

  ”

 is displayed in the 

temperature display area once, 

it indicates the sleep function is opened.

By pressing  the key

“        ”

 and 

“        ”

 for 5s simultaneously, when

“  

OF

   ”

 is displayed in the 

temperature display area once,  it indicates the sleep

function is closed.

Operation control:  Open the sleep function.  After temperature confirmation for tempering

 every time, the display area will extinguish for another 30s;

Close the sleep function. After temperature confirmation for tempering 
every time, the display area will not extinguish and keep on.

Lock and unlock 

Lock: after pressing the  key 

“        ”

 for continuously 3s, the display area will blink once, 

and the set temperature will take effect immediately, once entering lock state, the display 
area will not blink; after no-key operation for 30s, it could also enter automatic lock state, and 
the display area will blink once. 
Unlock: after pressing the  key 

“        ”

 for continuously 3s, the display area will blink once 

to unlock. Under the lock state, it is required to conduct key operation after unlock. 

After the initial electrification, the key is in lock state by default; it is required to operate after
unlocking.