11
OB-6 Operation Manual
Global Settings
To set a Global parameter:
1. Press the
globals
button. Pressing it once activates the upper set of
parameters. Pressing it a second time enables the lower set of param-
eters.
2. Press the program selector button (0 - 9) that corresponds to the desired
parameter. The parameters are printed above each switch.
3. Use the
bank
and
tens
buttons as decrement and increment buttons to
step through available settings.
4. Once you’ve chosen the desired setting, press the
globals
button again
to exit.
Globals - Top Row
0 . Transpose:
-12
…
12
—
Master Transpose control, 0 is centered. Steps
in semitones up to one octave up (+12) or down (-12).
1 . Master Tune:
-50
…
50
—
Master Fine Tune control; 0 centered. Steps
in cents as much as a quarter-tone up (+50) or down (-50).
2 . MIDI Channel:
All
,
1
…
16
—
Selects which MIDI channel to send and
receive data, 1 to 16.
all
receives on all 16 channels.
3 . MIDI Clock:
Sets the OB-6’s ability to send and receive MIDI clock
messages:
•
Off
: MIDI Clock is neither sent nor received
•
Out
: MIDI Clock is sent, but not received
•
In
: MIDI Clock is received, but not sent
• Slave Thru (
i-0
): MIDI Clock is received and passed to MIDI Out
• In, No Start/Stop (
n55
): Receives MIDI Clock but does not respond to
MIDI Start or Stop commands.
When set to
in
or
slave
thru
, if no MIDI clock is present at the selected input,
the arpeggiator and sequencer will not function.
Summary of Contents for ob-6
