Spotlights
PLEASE READ THE INSTRUCTIONS ON THE REVERSE BEFORE YOU BEGIN INSTALLING YOUR LIGHT
12V (0755/0761) or 230V (0758/0762)
Installation Diagram
IP20
A simple design, with a swivel base and adjustable knuckle joint. Available in nickel or weathered
brass. The anti glare bar over the lamp makes this a discreet source of spot lighting.
A remote transformer is required for 0755 and 0761 models.
DP0755 Spotlight
DP0761 Spotlight
Contents
1 - 12V Halogen Transformer (0758/0762 only)
2 - Backplate
3 - Knuckle Joint
4 - Shade (0761/0762 only)
5 - Bulb
6 - 2 x Fixing Screws
7 - 2 x Rawl Plugs
8 - Connector (0758/0762 only)
Required for Installation
-
Screwdriver, flat-head
- Small screwdriver, flat-head
- Drill (if holes are required)
Refer to Instructions overleaf to install this fitting.
0758 and 0762 are 230V fittings, supplied with dimmable integral transformer. For best dimming performance, use Trailing Edge
dimming modules only. Make the connections inside a suitble enclosure.
0755 and 0761 are Low Voltage 12V fittings. They MUST be connected to a 12V AC low voltage halogen transformer, min 20va
if installing on a 230V circuit. DO NOT CONNECT DIRECTLY TO MAIN SUPPLY. Terminal block not supplied with 0755/0761;
installation must be performed by a suitably qualified person. Make the connections inside a suitable enclosure.
Installation and Assembly Instructions
DP0758 Spotlight
DP0762 Spotlight
A
B
C
D
Fixing Screws
Connector Block (Not Supplied)
Main Supply
12V Transformer (Not Supplied)
Key
C
B
A
D
0758 / 0762
0755 / 0761
A
B
C
D
Fixing Screws
Connector Block
Main Supply
12V Transformer (Intergrated)
Key
A
B
B
D
C
DP0755/DP0761
DP0758/DP0762
2
3
4
5
6
7
8
SBC
AR70 HALOSPOT
LAMP GUIDANCE
TYPE
WATTAGE*
BASE
SHAPE
INCANDESCENT
CFL
HALOGEN
LED
n/a
n/a
50W
n/a
* Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
1
3
4
5
2
