17
2. BOOST
ON
> Press
menu/setting select
once your preferred
BOOST MODE
is displayed;
> This will then take you back to the first setting menu;
> If the EcoSalt2 is left untouched for ~ 30 seconds, or the
menu/setting cancel (go back)
button is
pushed, the display reverts to the
HOME
screen.
50% – 09:40 AM
BOOST
> The
HOME
screen will continue to show the cell duty cycle percentage, however the reference to “ON” has
been notably replaced by the reference to “BOOST”. This will remain for the 24 hour period;
> It is possible to alter the cell duty cycle during a 24-hour boost and the display percentage on the
HOME
screen changes as expected. This could be handy if the setting needs altering for the next day, once the
BOOST MODE
is finished;
> It should be noted though,
BOOST MODE
overrides every other setting. During the 24 hour period while
is
BOOST MODE
is active, the cell current is 100% output, and duty cycle is overridden to 100%. This is
regardless of the display on the screen.
ACTIVATING SPA MODE
The EcoSalt2 system is compatible with large swimming pool applications as well as much smaller spa
applications. Turning on the SPA MODE reduces the cell duty cycle by 80% of its current setting.
For example:
• If the EcoSalt2 is on for 10 hours per day, the
CHLORINE OUTPUT
is set to 50%, but the
SPA MODE
is
on: the EcoSalt2 cell duty cycle is only 1 hour, of that day;
• If the EcoSalt2 is on for 10 hours per day, the
CHLORINE OUTPUT
is set to 25%, but the
spa MODE
is
on: the EcoSalt2 cell duty cycle is only 30 minutes, of that day.
ENGLISH
ENGLISH
Summary of Contents for EcoSalt2 DES2-15E
