USER’S MANUAL
MA24-02/B
10
4. SETUP
Switch ON the scale and long press [ZERO]
[ZERO]
[ZERO]
[ZERO] key for 3 seconds. First “SETUP” and then “A.OFF” will display
successively.
Auto-off time setup
This enables operator to select the auto turn OFF time of the device.
Auto off time:
Auto off time:
Auto off time:
Auto off time: 120 sec/180 sec/240 sec/300 sec/Off
Buzzer on/off setup
This enables operator to select beep sound ON/OFF.
Buzzer:
Buzzer:
Buzzer:
Buzzer: On/Off
NOTE: To confirm the settings, please press HOLD when “END” displays on the display.
4.1
4.1
4.1
4.1. . . . CONNECTING W
CONNECTING W
CONNECTING W
CONNECTING WITH PC
ITH PC
ITH PC
ITH PC
The equipment can be connected to PC to transfer the weighing results.
1.
Start Hyper Terminal
Start Hyper Terminal program from clicking: Start Menu
→
Programs
→
Accessories
→
Communication
→
Hyper Terminal.
2.
New Connection Description
Give new connection a name then click OK.
3.
Select Your COM Port
Click Connect to select your COM port. Usually there’s only one option for select. Then click OK.
4.
Port Settings
Click Bits per second to set up rate at 9600, Data bits at 8, Parity at None, Stop bits at 1 and Flow control at
Hardware. Then click OK to complete your setting.
5.
Output Data
When the patient has been weighed and BMI calculated, simply press the PRINT key to output data from scale
to PC or an Optional Printer.
Parameters of RS232 interface
Set parameters of the scale interface on the connected device. It is not possible to change the scale parameters.
o
Baud rate: 9600 bps
