USER’S MANUAL
MA24-02/B
6
3.2
3.2
3.2
3.2. . . . KEY FUNCTIONS
KEY FUNCTIONS
KEY FUNCTIONS
KEY FUNCTIONS
Designation
Designation
Designation
Designation
Function
Function
Function
Function
ON/OFF-switch
Turn ON/OFF the scale
PRINT button
Data transmission via interface(Print-out the results)
BMI button
Determine Body Mass Index
HOLD button
To hold weighing result on the display / determine stable weighing value
ZERO setting key
To reset the display to 0.0kg display / Zero the scale (±2% of full capacity)
M1-5 button
To store 5 pre-tare values
PRE-TARE button
Setup target weight for tare before weighing
TARE button
Tare weight during weighing process
CLEAR button
To clear the wrong entry while entering digits
ENTER-key
To confirm the performing functions
Numeric keys
Numerical value Entering digits
3.3
3.3
3.3
3.3. . . . WEIGHING
WEIGHING
WEIGHING
WEIGHING
Switch on the scale with the [ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF] key. The diagnostic scale self-check is performed and then the software
version is displayed. The scale is ready for weighing when the “0,00 kg
0,00 kg
0,00 kg
0,00 kg” weight display is shown.
NOTE: If “0,00 kg” won’t display on the screen, press [[[[
→
0
0
0
0
←
]]]] key to zero the scale, [[[[
→
0
0
0
0
←
]
] ]
] can be used any time
to zero the scale.
Place a person in the middle of the scale. Wait until the stability display (
ο
) is shown and then read the weighing
result.
DIRECTION: If a person is heavier than the weighing range, the display will show the “Err” symbol (= overload).
3.4
3.4
3.4
3.4. . . . TARING
TARING
TARING
TARING
Tare allows the user to zero the instrument to cancel the weight of a container/ clothes from the reading of the
instrument, thus giving the true weight of the product/ person being tested.
o
Turn on the scale using [ON/OFF]
[ON/OFF]
[ON/OFF]
[ON/OFF] key.
