USER’S MANUAL
MA30-02/A
14
4.
4.
4.
4.2
2
2
2. . . . CONNECTING WITH PC
CONNECTING WITH PC
CONNECTING WITH PC
CONNECTING WITH PC
The images taken with the analyzer can be transferred to other devices either wirelessly or using a USB cable
provided by the supplier.
4.2.1. Connecting with cable
4.2.1. Connecting with cable
4.2.1. Connecting with cable
4.2.1. Connecting with cable
o
Plug the USB cable to the cradle and to the PC as indicated in the pictures below.
o
Plug the device into the cradle. If you wish not to use the cradle, connect the USB cable directly to the device.
o
On the display on the device will appear the message “USB connexion”. If the message doesn’t appear, turn
on the device.
o
The PC will automatically recognise the device and will enable image browsing.
NOTE: Always use the USB data-cable provided by the supplier.
4.2.
4.2.
4.2.
4.2.2
2
2
2. Connecting with
. Connecting with
. Connecting with
. Connecting with Bluetooth
Bluetooth
Bluetooth
Bluetooth
o
Place the Bluetooth device within 1 m (3 ft) from the analyzer.
o
Press and hold “M” button, on the side of the analyzer.
o
Follow the steps in the Bluetooth settings (see 4.1.5. Bluetooth settings)
PC
Cradle (back side)
