19505P-43 (10-15)
2 of 3
6. Plug headsets into headset jacks and ensure connectors are fully seated.
OPERATION
1. Push the white on/off button, it will illuminate, indicating power "on".
2. Turn the system volume control knob to approximately 1/3 turn from the off position.
3. Adjust headset for a comfortable fit. Position the boom mounted microphone directly in
front of your mouth, no more than 1/8 inch from your lips.
4. Speak into the microphone. If you hear yourself speaking through the earphone, you are
ready to communicate. If you do not hear yourself through the earphone, check the
microphone switch located on the earcup to be sure it is in the "on" position.
Above each headset jack on the Master Station and Remote Headset Station is a headset
volume control. Adjust your individual volume control to a comfortable listening level.
Should more volume be required, increase the system volume by turning the system volume
control knob clockwise.
NOTE:
To prevent ambient noise from being fed into the system
during periods of no communication, press the microphone
switch on the headset to the off position.
With the microphone circuit turned off, the earphone circuit remains active for monitoring of
system.
