4 of 10
19541P-42 (03-12)
Acceptable antennas for use with this product:
•
Whip Antenna (P/N: 40688G-92)
•
Remote Antenna Kit, Mag-Mount (P/N: 40688G-93)
•
Remote Antenna Kit, Permanent (P/N: 40688G-96)
L
L
i
i
n
n
k
k
i
i
n
n
g
g
Before a belt station and a gateway can be connected, they must first be
linked
. As a security
measure, the
close-link
feature requires devices to be in proximity of between 1 to 3 ft (0.3 to
0.9m) in order to successfully link. This ensures that the units are not inadvertently linked with
other units on the premises.
Linking procedure:
1.
Ensure units are within 1 to 3 ft (0.3 to 0.9m) of each other.
2.
Simultaneously (within 1-2 sec) press and release the LINK button on the U9921-GUV and
the LINK/PTT button on the belt station to link with.
3.
Amber LED’s will flash on both devices. A momentary red LED indicates a successful
close-link.
4.
Upon successful link the U9921-GUV will attempt to establish a connection with the belt
station.
5.
Upon successfully establishing connection the LED on the controller will flash a green
pattern corresponding to the number of belt stations connected.
Tip:
Once linked, the devices will not need to be linked again unless they are purged (see
Purging
).
Each belt station is able to be linked to only one gateway at a time. A gateway can have up to six
belt stations linked and be connected to four of those six at one time.
S
S
t
t
a
a
t
t
u
u
s
s
I
I
n
n
d
d
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
The front panel has a multi-color LED in the center which serves as a status indication for the
gateway.
Table 1
below lists these states.