Model
UCMM50 UNDER CABINET MONITOR MOUNT
To ensure the correct usage, please read and follow the instructions manual thoroughly. Please store the instructions in a safe place
1
Special techniques are necessary for installation of the panel display mount.
Manufacturer assumes absolutely no responsibility for injuries and damages that may occur due to improper installation and handling.
All PDR mounts and adapters carry a limited lifetime warranty against defects in material and workmanship. We are not liable
for improper installation that results in damage to mounts, adapters or presentation equipment.
Mounts by
A division of David Engineering & Mfg. Inc.
!
Suitable for displays with 75mm &
100mm VESA mounting pattern
!
Simple to adjust no tools required
!
2”Adjustable height from 6.8” to 8.8”
!
100 deg tilt and 360 deg. rotation
!
Quick monitor removal with exclusive
“
Bayonet locking system”
Features
Thank you for purchasing the
PDR
monitor mount with the exclusive
“Bayonet locking system”
To ensure customer safety, be sure to decide the installation location so that the strength is sufficient to
withstand the weight of both the monitor and the mount.
Fully tighten all of the mounting screws as specified in the instructions.
Quick disconnect lever
Height adjuster
View angle adjuster
Mounting plate
Mounting hardware
Wood screw
Monitor mounting screw
Projector wall mounting application fig 2
360 deg Rotation
for future reference.
