-8-
PREPARATIONS
Description
LL360P
Storage Temperature:
-4º F to 140º F
(-20º to 60º C)
Power Supply:
Three (3) AA cell alkaline provide
approx. 5 hours on continuous
work
Water/Dust Protection
IP54
Net Weight:
2.9lb (1.3kg)
Inserting/Replacing Batteries
Rechargeable or alkaline batteries
are suitable for use to power your
instrument.
!
WARNING
Always replace all
alkaline batteries at
the same time. Only use batteries
from one brand and with the identical
capacity.
Remove the batteries/pack from the
tool when not using it for extended
periods. When storing for extended
periods, the batteries can corrode and
discharge themselves.
To open the battery compartment
5
, press on the latch and fold the
battery lid upward.
Insert the batteries. When inserting,
pay attention to the correct polarity
according to the “+” and “-” icons
inside of the battery compartment.
Use either alkaline batteries or
Ni-Mh batteries. When inserting
alkaline batteries, pay attention to
the correct polarity according to the
representation on the inside of the
battery compartment. Always replace
all batteries at the same time. Only
use batteries from one brand and
with the identical capacity.
Remove the batteries from the
tool when not using it for extended
periods. When storing for extended
periods, the batteries can corrode
and discharge themselves.
