background image

-15-

LIMITED WARRANTy

Dave White’s SitePro (“Seller”) warrants to the original purchaser only, that all David 

White laser tools and optical instruments will be free from defects in material or 

workmanship for a period of two (2) years from date of purchase.  

SELLER’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under this Limited 

Warranty and, to the extent permitted by law, any warranty or condition implied by 

law, shall be the repair or replacement of parts, without charge, which are defective 

in material or workmanship and which have not been misused, carelessly handled, 

or misrepaired by persons other than Seller or Authorized Service Center. To make 

a claim under this Limited Warranty, you must return the complete laser, optical 

instrument or David White product, transportation prepaid, to SITEPRO Service 

Department or Authorized Service Center. Please include a dated proof of purchase 

with your tool. For locations of nearby service centers, please call 1-855-354-9881.

THIS LIMITED WARRANTY DOES NOT APPLY TO ACCESSORY ITEMS SUCH 

AS TRIPODS, RODS, HAND LEVELS, FIELD SUPPLIES, TAPES, MOUNTING 

DEVICES AND OTHER RELATED ITEMS. THESE ITEMS RECEIVE A 90 DAY LIMITED 

WARRANTY. 

To make a claim under this Limited Warranty, you must return the complete product, 

transportation prepaid. For details to make a claim under this Limited Warranty please 

visit www.davidwhite.com or call 1-855-354-9881.

ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR 

FROM DATE OF PURCHASE. SOME STATES IN THE U.S., AND SOME CANADIAN 

PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED 

WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED TO LIABILITY FOR 

LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME 

STATES IN THE U.S., AND SOME CANADIAN PROVINCES DO NOT ALLOW THE 

EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO 

THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY 

ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE IN THE U.S., 

OR PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

THIS LIMITED WARRANTY APPLIES ONLY TO PRODUCTS SOLD WITHIN THE 

UNITED STATES OF AMERICA, CANADA AND THE COMMONWEALTH OF PUERTO 

RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT 

YOUR LOCAL SITEPRO DEALER OR IMPORTER.

David White is a registered trademark and distributed exclusively by SitePro.

Summary of Contents for LT8-300

















Reviews: