10/31/2016
DAVID DAVID 4 Manual
http://www.david3d.com/en/support/david4/printversion
5/38
3. Working distance
Setup of the object and arrangement of the projector and camera
Place the scanner in front of the object to be scanned and aim the projector so that it illuminates the
surface to be scanned - not less, but also not much more.
4. Projector focus
Adjust the focus of the projector with the focus lever, so that the stripes are perfectly focused on the
object surface.
5. Selection of camera
Under "Camera Setup", select your camera (e.g. DAVID-CAM-3.1-M). The live image from the camera is
displayed. If necessary, set the mechanical aperture and focus so that you get a picture.
6. Position of the camera