10/31/2016
DAVID DAVID 5 Manual
http://www.david3d.com/en/support/david5/printversion
35/37
"Comparison" allows to measure signed distances between two surfaces:
1. Select a scan and set it as
Test Object
.
2. Select a scan and set it as
Reference Object
.
3. Enter the desired
Tolerance [mm]
.
4. Click on
Compare
.
5. Add data tips on the reference scan with
Add Reference Marker
(
+
).
Introduction
Installation
Setup
Calibration
Scanning
Shape Fusion
3D Viewer