DAVID DigaStudio, Manual

DigaStudio: Functional Specification

Page 10 of 14

2.6.2 Microphone inputs

In addition to the standard microphone inputs 2 additional ones are provided (MIC3, MIC4) which are
identical to MIC1 and MIC2. These sources can only be selected by means of the PC software.

2.6.3  Digital audio inputs

For digital signals in AES/EBU format 2 inputs are provided with XLR connectors. To avoid any
connection problems the input signals are fed via input transformers and sampling-rate converters.

2.6.4  Digital audio outputs

The main sum signal is available on 2 digital outputs, decoupled by means of output-transformers. The
synchronization is performed either internally (48 kHz) or externally by means of a sampling-rate
converter, which can be synchronized via a sync input (XLR jacks) with empty-frame AES/EBU.

1

3

Edit Controller

The Edit Controller functions are a subset of those of the D.A.V.I.D. Hardware Controller EdiDesk. For
the controlling of editing software a jog wheel and a number of different function keys are provided.

By default the buttons are assigned the most import 

Edigas

 or 

Multitrack Editor

 functions:

•

Jog wheel mode:

SCRUB / SKIP

•

Edit functions:

SET MARKER, MARK IN, MARK OUT, CUT INSIDE,
CUT OUTSIDE, UNDO, REDO

•

Transport functions:

PLAY / STOP, RECORD, FF, FREV, JUMP TO PREV
MARK, JUMP TO NEXT MARK, PLAY CLIP

•

Trim functions:

LOOP FROM, LOOP TO

•

General functions:

COPY, PASTE, UP, DOWN

Jog wheel with edit function keys

1

 With external synchronization only digital output 1 is available.