Focus control
+
Fig. 1: Inserting the laser battery
13
4. Start-up
4.1. Insert line laser battery
1. Remove the battery compartment cover.
2. Insert a battery type CR123A as shown in the figure.
3. Re-attach the battery compartment cover.
4.2. Installation
1. Install the camera driver before attaching the camera to your PC. Please follow the enclosed instruc-
tions from Logitech (manufacturer).
2. The DAVID Laserscanner software is not to be installed on the hard drive, it is instead started from
the USB flash drive. When Windows has been started, insert the USB flash drive into an available
USB port on your computer and wait for a few seconds. Depending on your system‘s settings,
a pop-up window will appear asking you what procedure you require. Choose Display folder.
Alternatively navigate in Windows Explorer or via Computer to the drive „DAVID“.
There alongside the three folders you will find the Start_DAVID or Start_DAVID.bat file. We recom-
mend that you create a shortcut for Start_DAVID to your Desktop to make it easier for you to start the
program. To do this using the right mouse button click on Start_DAVID and while keeping the mouse
button pressed down, drag the icon to a vacant space on your Desktop and then release. Choose
„create shortcut here“.
Note:
You can install a back-up copy of the software onto your hard drive. However you must always
start the software directly from the supplied USB flash drive in order to use the full range of functions
(copy protection).
3. To start the DAVID Laserscanner software double click on the icon on your Desktop or on the
Start_DAVID file.
4. DAVID requires Microsoft .NET Framework in order to operate. Therefore when starting the software
an automatic check is performed to see if it is installed. If not, please follow the on-screen
instructions to install .NET Framework. An internet connection may be required for this purpose.
