DAVINCI GLIDERS / JAZZ
8
15pt
10.2 Turn control
To familiarize yourself with the JAZZ your first turns should
be gradual and progressive.
To make efficient and coordinated turns with the JAZZ first
look in the direction you want to go and check that the air-
space is clear. Your first input for directional change should
be weight-shift, followed by the smooth application of the
brake until the desired bank angle is achieved. To regulate
the speed and radius of the turn, coordinate your weight
shift and use the outer brake.
We recommend to take off with closed trimmers.
10. In flight characteristics
10.1 Speed control
JAZZ has ling brake travel length and increased brake pressure.
You can change speed by using the trimmers an speed bar.
By pulling the trimmers to the closed point and brakes are
pulled approximately 30cm, the JAZZ will achieve its best
minimum sink rate.
