4
Mounting Consoles in the
Solar Power Kit (1.4 Ah battery, #6614)
Note: You may mount the shelter before installing the console or Envoy. However, it may be
easier to do this at a workbench rather than in the field. In the case of an Envoy, you will
need a PC to set up the Envoy after you power it up.
The shelter has been designed to fit Davis consoles and Envoys. Inside the shelter,
outlines of the Vantage Pro2 console, Vantage Vue console, and Envoy will
indicate where they will be mounted in the shelter.
Inside the Solar Power Kit you may install:
•
A wireless Vantage Pro2 console
•
A Vantage Vue console
•
A wireless Weather Envoy
Note: Use the Heavy Duty Solar Power Kit (#6612) to power a cabled Vantage Pro2, a cabled
Weather Envoy, or an Envoy8X.
Mounting a Wireless Vantage Pro2 Console in the Solar
Power Kit
1. Remove all packaging material.
2. Unplug the power cable from the jack closest to the back on the charging
circuit.
Console/Envoy Power
Battery power
Solar power
Summary of Contents for 6614
Page 2: ......
