Page | 14
©Davis Instruments Australia V1.3
5.2.1 Weather Station
For Davis stations it is important to specify what type of logger you are using. For
WLIP you need to specify the IP of the data logger. If you have changed the port
settings for the WLIP they need to be specified here as well.
Enter the IP and port (separated by a colon) in the "WLIP" input field (example:
"192.168.1.222:10001").
When no port is specified the WLIP default port (22222) is used.
5.2.2 Weather Cam
Allows you to pair a weather camera with your MeteoBridge data uploads. Only
Ubiquiti AirCam is currently supported.
5.2.3 Local Settings
Allows you to specify offsets and calibrations for certain readings.
Note
:
Historical data refers only to the maximum and minimum values which
MeteoBridge stores on a remote server in case of network failure.
Note: Station Altitude is used to calculate pressure. It is important to enter an accurate
altitude.
For more detailed information on the options contained on the Weather Station page
visit
www.meteobridge.com/wiki/index.php/Select_Station
5.3 Weather Network
This allows you to upload to the predefined weather networks. You will need to have
or setup an account with the weather networks before you can upload to them.
Select a service to add from the drop down menu and enter the requested details.
Once you click save MeteoBridge will reboot and apply the changes.
For more detailed information on the setup of the network feeds visit
www.meteobridge.com/wiki/index.php/Weather_Networks
