Page | 4
©Davis Instruments Australia V1.3
1 Introduction
This guide aims to help you connect your MeteoBridge server to your LAN or WLAN
and use a Davis Weatherlink Data Logger with the MeteoBridge.
This guide is for the basic operation of MeteoBridge used exclusively with Davis
Vantage Vue and Vantage Pro 2 weather stations. For information on compatibility
and use of other branded weather stations please refer to the developers’ wiki at
There are 3 key pieces of information associated with the MeteoBridge that will be
identified throughout the setup process. Record them here.
MAC Address
IP Address
License Number
Davis Instruments Australia provides a router configured with the MeteoBridge
firmware. We provide assistance with technical issues related to the operation of
Davis weather stations and communication between them and the MeteoBridge.
For questions related to the use of MeteoBridge with other branded stations,
weather networks and push services please consult
2 Contents
Your MeteoBridge comes supplied with
1.
MeteoBridge Router TL-MR3020
2.
MeteoBridge AC adaptor
3.
Ethernet Cable
4.
This Guide
