Page 6
Multi-Purpose Shelter
Installing a “Module”
You may install any of the following “modules” into the MPS: sensor interface
module, Protected Junction Box, Alarm Output Module (AOM), or Interface
Cable Adapter Module. Use the #6 x 1/2" (12.5 mm) self-tapping screws as
shown below. If you mount a module on the box’s cover, you will not be able to
ground it (the ground jumpers cannot reach the ground lug) so only install a
module on the door if it does not require grounding (such as the AOM). When
grounding “modules” installed in the shelter’s main box, use the ground
jumpers supplied with the MPS to connect to the shelter’s ground lug as
shown in “Grounding the Shelter and Components” on page 11.
I
NSTALLING
A
M
ODULE
Installing a Console
You may install the station console into the box or the cover, using the screws
shown below.
I
NSTALLING
A
C
ONSOLE
