DAVIS 6464, User Manual

 1

Rain Collector 

(#6464 & 6464M)

This rain collector can be used with Vantage Pro2™ 
weather stations, including Vantage Pro2, Vantage Pro2 Plus, 
and the Sensor Transmitter, as well as an EnviroMonitor Node.
The following instructions assume the rain collector is being used with a 
Vantage Pro2 or Vantage Pro2 Plus Integrated Sensor Suite. Refer to the user 
manual that came with your station for more information. 

Manuals are available online at www.davisinstruments.com

Note: Model number 6464 is factory-calibrated to take rain measurements in 0.01 inches. The 

metric version of the rain collector, number 6464M, comes factory-calibrated to take 
measurements in 0.2 mm. 

Components

• Rain collector cone latched onto base
• Base with tipping mechanism and 40’ (12 m) cable
• Four #8 x 3/4” screws
• Debris Screen
•16 3.5” (9 cm) bird spikes (optional)

RAIN 

CONE

40’ Cable 

Sensor Cable

Exiting Through

Slot

TIPPING

MECHANISM

Bubble Level

BASE

Finger Grips

Debris Screen

(locks snugly 

inside cone)

Latch

Bird Spike

Sockets

3.5” (9 cm)

Bird Spikes (16)

4 #8 x 3/4”

Screws

Cable Tie

Latch 

Opening

Drain 

Screen