Chapter 3
Page 26
Vantage Pro Console Manual
All Vantage Pro Stations come with large wind cups. Switch this setting to
small only if you have separately purchased and installed small wind cups.
Use the "+" and "-" arrow keys to switch between large and small. Press and
release the DONE key to move to Setup screen 12.
Note:
Large wind cups are more sensitive to low wind speeds and are the best choice for most users. Small
wind cups are less sensitive at low wind speeds; however, they are more resilient. Only install small
wind cups if you expect winds over 120 mph (194 kph).
Setup Mode - Screen 12: Rain Collector
Your Vantage Pro is pre-configured for the included rain collector. Simply press
“DONE” to move to the next screen. You may change the rain display’s units
from inches to millimeters with the UNITS key. See “Selecting Units” on
page 32.
Setup Mode - Screen 13: Rain Season
Because rainy seasons begin and end at different times in different parts of the
world, you must specify the month you wish your Yearly Rain data to begin.
January is the default. Use the "+" and "-" arrows to select the appropriate
month.
Exiting Setup Mode
Press and hold down the DONE key to exit Setup Mode. The screen will return
to the Current Conditions screen. Re-enter Setup Mode at any time by pressing
the DONE and "-" keys together.
C
U R R E N T
W
E A T H E R
M
O D E
The Current Weather screen is the heart of the display and where you’ll likely
spend most of your time. Up to ten weather variables are displayed simulta-
neously on the Vantage Pro’s LCD screen. Some of these variables are always
displayed: Barometric pressure, Outside Temperature, and Outside Humidity,
as well as Wind Direction. Other variables share display space and must be
accessed through keypresses.
Activating Weather Variables
Displaying any current weather information is straightforward. Press any func-
tion key to display that weather variable’s current value. Selecting a variable
also activates that variable’s graph.
Note:
The graph icon is always displayed next to the active weather variable.
You can also select any variable currently displayed on the LCD screen using
the navigation keys. Pushing the left, right, up, or down arrows will move the
graph icon to the next data field in the selected direction.
Summary of Contents for and Vantage Pro
