Console Installation
Page 14
Vantage Pro Manual
D
ISPLAYING
THE
C
ONSOLE
You should place the console in a location where the keyboard is easily accessi-
ble and the display is easy to read. For more accurate readings, follow these
suggestions:
• Avoid placing the console in direct sunlight. This may cause erroneous readings
and / or damage to the unit.
• Avoid placing the console near radiant heaters or heating / air conditioning ducts.
• If you are mounting the console on a wall, choose an inner or interior wall. Avoid
walls that heat up or cool down depending on the weather.
Table & Shelf Display
The kickstand may be set at five different angles appropriate for different dis-
play angles.
1. Lean the kickstand out by pulling on its top edge.
You’ll see the indentation for your finger at the top edge of the console.
2. Slide the catch to arrest the kickstand in the appropriate angle.
Choose low angles for display on a coffee table or other low area. Choose
higher angles for display on a desk or shelf.
3. Pull up on the stand to close it. It will be a little tight, so it’s okay to push hard
enough to get it to slide.
Summary of Contents for and Vantage Pro
