Temperature
Vantage Pro Manual
Page 47
T
EMPERATURE
Outside temperature
sensor reading seems
too high
Check calibration number and adjust if
necessary.
ISS may need to be relocated. See ISS (or
other transmitter) manual
33
Inside temperature
sensor reading seems
too high
Move the console (or other temp sensors
if you have installed additional wireless
temperature sensors) out of direct sun-
light.
Make sure that the console or sensor is not
in contact with an exterior wall that heats
up in sunlight or when outside tempera-
ture rises.
Make sure the console or sensor is not near
a heater or other internal heat source
(lamps, appliances, etc.).
Check calibration number and adjust if
necessary.
14
14
14
Outside temperature
seems too low
Check calibration number and adjust if
necessary.
Sprinklers may be hitting the ISS radiaion
shield. Relocate. See ISS manual.
33
Inside temperature
sensor reading seems
too low
Make sure the the console or other tem-
perature sensor is not in contact with an
exterior wall that cools down when out-
side temperature drops.
Make sure the console or other tempera-
ture sensor is not near an air conditoning
vent.
Check calibration number and adjust if
necessary.
14
14
33
Problem
Solution
PG.
Summary of Contents for and Vantage Pro
