7
Note:
For mounting on larger diameter pipes, the housing can accommodate U-bolts with
5/6
''
(8 mm) threads for pipes up to 2.40
''
(61 mm) outside diameter (not provided).
Power Up
Note:
Register your Vantage Connect online and wait 5 to 10 minutes BEFORE you power
it up to avoid a delay in uploading data. If you already powered up before registering,
remove power from the Vantage Connect, register, then repower.
1. If using Vantage Connect with a
cabled
ISS, remove the plug from one of the
holes in the bottom of the shelter. Run the ISS cable up through the hole.
Outside the shelter, wrap a split grommet around the cable and push the
grommet securely into the hole. Plug the cable into the ISS cable jack.
2. Plug the main power cable back into the jack. You should hear two beeps.
Main power jack
Weather Station
Cell Network
Status LEDs:
Status LED on/off
button
Jack for cabled ISS cable
