background image

ET 

 

FORECAST 

If you have a solar radiation sensor, press 

 2

ND

 

  & 

 ET 

 to 

toggle between: 

•  ET Day (0.00 in, 0.0 mm) 

•  ET Month (0.00 in, 0.0 mm) 

•  ET Year (0.00 in, 0.0 mm) 

Press 

 2

ND

 

 & 

 UNITS 

 to change unit of measure.

 

All rain and ET readings will read in the same unit of measure.  Changing 
one from 0.00 inches to 0.0 mm (or vice versa) changes all others.  

 

Update interval:

 

ET is updated once an hour, on the hour.

 

 

 

Update Interval: 

The forecast is updated once an hour, on the hour.  

Forecast Icons:

  

The forecast icons predict the weather within the next twelve hours.

 

    

            

                                                              

                                                       

                                         

 

   Mostly             Partly                 Mostly              Rain             Snow 
   Clear              Cloudy               Cloudy             

 
If rain or snow is possible (but less certain than "likely"), you will see the 
partly cloudy icon along with the rain or snow icon.  
 

Ticker Tape: 

Press 

 FORECAST 

 

to view a detailed

 

forecast in ticker tape. The ticker 

tape messages predict the weather up to 48 hours ahead. 

16       

 17 

 

 

 

Summary of Contents for Vantage Pro2 Updater

















Reviews: