Setup Mode
12
Screen 4: Time & Date
The very first time you power-up the console, the time and date are set to
12:00AM January 1
st
, 2004. Be sure to enter the correct date and local time.
Screen 4: Time & Date
To change the time and date:
1. Press the right and left arrows to select the hour, minute, month, day or year.
The selected time or date setting blinks on and off.
2. To change a setting, press the up and down arrows to adjust the value up or
down.
To choose a 12-hour or 24-hour clock, first select either the hour or minute
setting, then press 2ND and immediately press UNITS
.
This toggles the
clock setting between the two clock types.
To choose between a MM/DD or DD.MM display for the date, first select
either the day or month setting, then press 2ND and immediately press
UNITS
.
This switches the console from one date display to the other.
3. Press DONE to move to the next screen.
Screen 5: Latitude
The console uses latitude along with longitude to determine your location,
allowing it to adjust the forecast and calculate the times for sunset and sunrise.
Screen 5: Latitude
• Latitude measures distance north or south of the equator.
• Latitude is used with longitude to identify your position on earth.
am
