Selecting Units of Measure
20
3. Press WIND a second time to display the wind direction in degrees instead
of the wind speed.
Note:
When displayed in degrees, Due North displays as 360
º
for consoles with firmware dated May
2005 or later. Previous releases marked Due North at 0
º
.
Each additional WIND
key press toggles the display between wind speed
and wind direction in degrees.
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
Temperature may be displayed in degrees Fahrenheit (ºF) or
Celsius (ºC).Temperatures can also be displayed in degrees or
in tenths of a degree.
2. Press TEMP again to select inside temperature.
Each consecutive press of TEMP displays temperature readings for any
optional temperature, temperature/humidity, soil temperature, soil moisture
stations also connected to your console. The order the optional sensors
readings display depends on your station configuration. Temperatures for
temperature stations display, with soil temperature and moisture stations
displaying consecutively.
Humidity
Press HUM to select outside humidity. Pressing HUM a second time
selects inside humidity. Humidity is displayed in percent relative humidity.
Each consecutive press of HUM displays humidity readings for any optional
humidity, leaf wetness, and leaf temperature stations also connected to your
console. The order the optional sensors readings display depends on your sta-
tion configuration. Humidity readings for humidity stations display, with leaf
wetness and leaf temperature readings displaying consecutively.
TEMP
N
W
NE
SE
SW
Vertical Scale: X10
WIND
RAIN YEAR
in
TEMP OUT
HUM IN
HUM OUT
DAILY RAIN
in
TEMP IN
hPa
BAROMETER
STATION NO.1
F
F
F
MPH
Last 24 hrs
hr
Every 1
S
E
NW
pm
HEAT INDEX
HUM OUT
HUM IN
CHILL
F
DEW POINT
F
hPa
BAROMETER
Humidity, Pressure, Dew Point & Wind Chill
HUM
DEW
