Hardware Installation
2
Hardware Installation
The Weather Envoy can be installed and connected to a computer via USB, or
serial data logger.
Local Connection Windows Computer Requirements
WeatherLink is compatible with computers using a USB or serial port
connection running the following platforms: Windows XP or later.
Your Weather Envoy and WeatherLink also require the following for a local
Windows computer connection.
• Windows-compatible display
• One free serial port or USB Port.
Local Connection Macintosh Computer Requirements
Your Weather Envoy requires the following for a local Macintosh computer
connection:
• Macintosh computer running Mac OS X v10 up to but not including
Catalina with at least 5 MB of free disk space.
• One free USB Port
Preparing the Envoy
Perform the following procedures to prepare your Envoy for operation. These
steps are described in detail later in the manual.
• Install the data logger
• Install the batteries and optional AC power source
• Mount your Envoy
• Connect Envoy to WeatherLink software
• Test using WeatherLink software
• Set up the Envoy using WeatherLink software
Install the Data Logger
Installing the data logger supplied with WeatherLink is the first step in
preparing the Weather Envoy to transmit data to the WeatherLink software.
Summary of Contents for Vantage Pro2 Weather Envoy
Page 31: ......