- 31 -
Demonstration of the wake up function
Press and hold the Light and Alarm keys 2 seconds, will entry the demonstration mode.
LCD will show following:
The default wake up time is 15 minutes.
Move Alarm key up or down to adjust the following time:
15, 20, 40, 60, 80, 100, 120 minutes
Press Alarm key to confirm the time.
The LED lamp will light up gradually.
When the wake up time is reached, the default or pre-selected alarm sound will play back.
Press any key to entry snooze function and 10 seconds later it will alarm again.
Press the Alarm key. LED lamp and alarm sound will be off, then leave the demonstration mode.
Using the reset function
Use the pin to reset the unit to the factory setting. The reset should be done also if the device is not working properly.
We also recommend to do the reset, if you connect the adaptor to the unit.
Reset Hole
Vol
Alarm
Time
Light
Display
Radio