Maintenance works
Yes/No
Descriptions
Consumable parts replacement
Yes
The battery is the only part need to check the lifetime to
replace. Check the battery status on the back-end system.
Cleaning device
No
Re-calibration / Re-validation
No
No calibration is required for the wireless transmitter.
.
The Daviteq Sigfox-Ready V1A Single-axis Vibration Sensor comprises 02 parts connected together as shown below
picture.
- The Daviteq Sigfox-Ready wireless transmitter
- The Daviteq V1A vibration sensor module
Figure 6. Complete set of WSSFC-V1A-025 vibration sensor mounted on the motor
2.2.1 Maintenance for Wireless transmitter
2.2.2 Maintenance for V1A sensor module
3. Advanced Guide
3.1 Operating principle of the Sigfox-Ready V1A Single-axis
Vibration Sensor
3.1.1 Operating principle of the complete device
