1
Hardware installation & configuration
1.1 Start Installation
In this chapter, it will explain how to install DV-201DM. Connect power cable to DC
power input of system, and the other part of AC/DC adaptor to AC power source.
1.2 Safety Warning
When installing and operating the DV-201DM system, follow the safety guideline
provided below to help prevent serious injury and/or damage to DV-201DM system.
(1) Do not personally perform any maintenance (Unpacking) on this system. This
system does not contain any user serviceable parts. Maintenance is to be
performed only by qualified personnel.
(2) To avoid the risk electrical shock while installing H/W, you must remove the
power cord socket from the power connector on the back of DV-201DM.
(3) Put on a wristlet for preventing static electricity.
(4) Do not use any other power adaptor then the one provided with the DV-201DM.
(5) Maintain between 0
℃
and 40
℃
and it must be well ventilated
(6) When removing or connecting cables, always unplug DV-201DM power.
(7) Make sure all ventilation chambers are not obstructed at all times.
(8) Do not put heavy equipment and machinery on the system.
1.3 How to install H/W
(1) Place on a flat surface.
(2) Make sure that all rubber feet are attached. (for cooling system)
(3) Connect power cord to system.
2 - 5
Summary of Contents for DV-201DM
