SHOW
This command display NAT Mode, IP address, subnet mask, and Ethernet
address, which are required to perform LAN service and WAN service.
Executing “show” at “DV_GW/CONFIG/IP)” prompt can see details.
[Example]
DV_GW/CONFIG/IP>
show
©
-------- WAN Parameters --------------------------
NAT mode - Enable
WAN IP Address - 0.0.0.0
WAN Subnet Mask - 0.0.0.0
WAN Gateway - 0.0.0.0
Ethernet Addr - 00:08:52:88:12:92
LAN IP Address - 192.168.2.12
LAN Subnet Mask - 255.255.255.240
LAN Gateway - 0.0.0.0
-------- DNS Parameters --------------------------
DNS Not Used
--------------------------------------------------
CHANGE
This command used for setting NAT mode, IP address, subnet mask, and Ethernet
address.
Details can be seen by executing “show” at “DV_GW/CONFIG/IP>” prompt.
[Example]
DV_GW/CONFIG/IP>
change
©
-------- WAN Parameters --------------------------
NAT mode - Enable
WAN IP Address - 0.0.0.0
WAN Subnet Mask - 0.0.0.0
WAN Gateway - 0.0.0.0
Ethernet Addr - 00:08:52:88:12:92
LAN IP Address - 192.168.2.12
LAN Subnet Mask - 255.255.255.240
LAN Gateway - 0.0.0.0
-------- DNS Parameters --------------------------
DNS Not Used
--------------------------------------------------
2 - 37
Summary of Contents for DV-201DM
