06
•
Loosen the quick release lever that secures
the handlebar*. (see image 1)
•
Grip the handlebar and rotate the handlebar
anti-clockwise so the brake levers point
vertically. (see image 2)
•
Using the quick release lever located on the
stem, raise the stem to the minimum insertion
mark. This will allow the handlebar to clear the
front axle once folded.
•
Lift the small catch located on the handlebar
latch and pull the latch towards you. (see
image 3)
•
Make sure to pull the latch so that the hook
releases from the stem. (See image 4)
•
Fold the handlebar down.
•
Squeeze the internal section of the pedal and
push down to fold the pedals.
•
Loosen the quick release seat clamp and
lower the saddle to its lowest point, tighten the
quick release again to secure the seatpost.
•
Rotate the small plastic retaining clip on the
frame latch to allow the lever to be released.
Now open the frame latch so it is fully open.
(see image 5)
1.
3.
4.
Folding your bike
•
Make sure to open the frame latch as far as possible
as the latch features a double locking catch that will
automatically release when the frame latch is open
fully.
•
Now fold the frame in half until the frame magnets*
located on the front fork and rear dropout connect.
5.
2.
*Fitted on selected models only.
folding bike manual.indd 6
20/06/2011 11:00:19
