4096-225
3.4M & 3.7M Az/El TRUSS MOUNT
14
STEP 4:
STEP 5:
Attach one end of the short support brace
(item 8) to the lower ring on the center hub
with 3 / 8” hardware (items 15, 16, 17, 18).
Do not tighten until instructed.
A) Attach the other end of the short support
brace (item 8) to the left side of the long
brace (item 7) with 3 / 8” hardware (items
15, 16,17, 18). When all braces are
attached, begin tightening as follows.
B) Be sure the reflector is laying flat, as after
tightening
the reflector structure, its shape
will be
fixed. Center in the center hub by
tightening the 1 / 4” bolts to the center
plate.
Next, tighten all the hardware that
attaches the support brackets to the
reflector. Tighten the outermost bolts
securing the long braces to the support
brackets all around. Now tighten the bolts
connecting the long braces to the center
hub all the way around.
Next tighten the hardware connecting the
short brace to the long brace all around.
Finally tighten the hardware securing the
short braces to the center hub. The
assembly of the reflector and the support
structure is now complete.
Center Hub
[ 15 ]
[ 16 ]
[ 8 ]
[
16,17,18 ]
Lower Ring
[ 7 ]
[ 15, 16 ]
[ 8 ]
[ 16, 17, 18 ]
DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • sales@DAWNco.com
