CONTROL PANEL
You will be instructed throughout this document to learn a method of operating digital water heater. Please refer to the
diagram below to understand variety functions.
INSTRUCTIONS
1.
The current temperature represents the current temperature of water inside the tank.
2.
The target temperature represents that the water inside the tank will be heated up to this temperature.
3.
The heating temperature represents that a temperature is 3
℃
(5
℉
) lower than the target temperature. The water heater will
start working if the current temperature is lower.
4.
After connecting to the power source, the indicating lights(1) will flash on from the leftmost LED(7) to the rightmost LED(4)
sequentially and then light off all and repeat both three times. The temperature indicator(2) shows the current temperature.
As the indicating lights(1) light off all, the water heater won’t work.
5.
Indicating lights(1) illustrate the current temperature or the water heater is working or not and auto running mode is on or off.
Each LED represents 5
℃
(9
℉
).
9
(1)Indicating Lights(16 LEDs)
(2)The temperature Indicator
(3)The unit of temperature
(5)The button of rising
target temperature
(8)The button of
reducing target temperature
(6)The button of auto running
(4)The rightmost LED indicates the
water temperature of the tank being
higher than 95
℃
(203
℉
)
(7)The leftmost LED Indicates the
water temperature inside the tank
being lower than 25
℃
(77
℉
)
