Position tank vertically beneath faucet so the flexible tube from the faucet reaches the center faucet
supply tube on the tank and tank touches the wall. Mark the wall at the top of tank. Set tank aside.
Mark a second line 2 1/8" (54 mm) below the first line. Align bottom of bracket even with the
second line and screw into place. If a stud is not available, drywall anchors may be used for
additional support. Hang tank on bracket.
Be sure to allow for 4" to 6" (101.6 mm to 154.2 mm) air circulation around the front and sides of
tank.
NOTE :
The tank must be positioned so the hose
to the faucet does not twist or kink.
Mounting considerations to ensure back
siphonage cannot occur:
This faucet must be mounted on a surface
so that the faucet outlet is higher than the
highest portion of the sink.
bracket
15
Tank Installation
(stage 2)
