50
24 Hour Rainfall Alert
• Press and hold down the button
for 2 seconds until the icon for the
Temperature Alert” starts to � ash
• Press and hold down the “RAIN/ALERT”
button for 3 seconds to enter the alert
settings mode, the “OFF” � ashing display
of the alert, use the “HIST/UP” and
“DOWN” buttons to select the open (ON)
or disable (OFF) the alert function
• Press “RAIN/ALERT” to con� rm your
setting, the value of the rain alert � ashes,
use the “HIST/UP” and “DOWN” buttons to
set the value of the 24-hour rain alert to
be set.
• Press “RAIN/ALERT” button to con� rm
your setting and to end the setting
procedure.
Note:
• After 20 seconds without pressing any
button, the clock switches automatically
from Set Mode to Normal Mode.
Alert Sounds | Disarm Alert
• When armed alert value is reached, the
main unit will beep 5 times each minute,
until out of alert range.
• The flashing alert icon will indicate
alert.
• Press any button to stop the rain alert
sound.
NOW Rainfall Alert (silent)
• At the beginning of a rain event (NOW),
the rain drop icons will flash indicating
current rainfall.
• The drops will continue to flash until the
NOW reading reaches zero.
• This is a silent alert. Your station will not
beep, just the raindrops will flash.
• This silent alert can not be deactivated.
• The 24 hour rainfall alert is a separate
alert that is programmable.
Low battery
• If the column is display the battery
icon
, you need to replace the Main
Unit battery as soon as possible.
• If the column is to display the battery
icon “
you need to replace the wireless
sensor battery as soon as possible.
