35
GB
Troubleshooting
Problem
Possible cause
Solution
The temperature is too high
or too low.
The temperature control is
incorrectly set.
The steam iron is not
plugged in.
Check the setting of the
temperature control.
Plug the steam iron in.
Leakage or no steam.
The temperature control is
set too low.
Drej Turn the temperature
control to the MAX setting.
No steam is coming out for
the steam shot or vertical
steam shot.
The steam shot function
has been used too many
times without an adequate
pause between each shot.
Allow the steam iron to reach
maximum temperature before
continuing.
Water drips from the
soleplate.
The temperature control is
set too low.
Turn the temperature control
to the MAX setting.
The steam iron is not hot
enough.
Do not open the steam button
until the indicator light has
gone out.
There is too much water in
the water reservoir.
Pour the excess water out.
Not enoughsteam is
coming out for the steam
shot.
Check that the steam
button is set correctly.
Set the steam button to the
desired position.
The steam holes are
clogged.
Carefully clean the steam holes
with a wooden toothpick.
There is too little water in
the water reservoir.
Re� ll with water.
The spray function is not
working.
The pressure is too low.
Put your � nger on the spray
nozzle and pump several times
by pressing the spray button.
There is air in the system.
