Lodos Series
Pieces
LODOS SERIES PARTS
Front panel
Axial fan
Chimney fan
Chimney spiral pipe
Lighter
Motherboard
Burner
Injector
Gas injector nut
Gas flexi interior
3/4 gas seal
Waste throttle clamp
Motherboard wiring power line
Front control board wiring assembly
Axial fan cable line
Procestat
Procestat cable line
Gas valve cable line
Chimney fan cable line
C-14 socket
Power cord
Glass fuse
Boiler
Axial fan vibration absorber
Tors screw
Remote control
Flue adapter
Prostate tube
Temperature sensor
Ignition Electrode
(Lighter)
The ignition unit is a high-voltage spark plug combined with a flame sensor (ionization
sensor) in a housing. The ignition block has a plate in the holes to which two ceramic
insulators are fixed. A high-voltage spark plug electrode is attached to one insulator
and a flame sensor is attached to the other. A ground electrode is welded to the plate
between the insulators.The fastening of a high-voltage wire to the spark plug is
carried out with a nut. A plug wire is permanently attached to the flame sensor bar.
The distance between the spark plug electrode and the ground electrode should be
4
±
1 mm.
The distance between the spark plug electrodes and the ceramic tiles should be
10
±
2 mm.
10
www.daygas.eu
HEAT RESISTANT,
FIREPROOF COVER
FLAME
SENSOR
SOIL
ELECTRODE
SPARK PLUG
ELECTRODE
Summary of Contents for LODOS Series
Page 22: ...22 WARRANTY CERTIFICATE...
Page 25: ...25...