DAYGAS LODOS Series, User Manual

Safety Rules

CAUTION! Carefully read the warnings and information contained in this manual.

Local gas distribution companies approved by the manufacturer and having the 

installation qualification approved by the local gas distribution companies of these 

companies. Assembly by the manufacturer’s authorized persons who have 

received assembly training. Must be installed in accordance with the rules.

Make sure that the areas where the device will be installed are adequately 

ventilated. Should be done. In accordance with the ventilation conditions 

determined by the local gas distribution companies should be mounted. 

The device should never be operated in areas without adequate ventilation.

The device, which is not properly assembled, should never be operated.

Gas determined by local gas distribution companies in the usage area of the 

device it must be checked whether it is suitable for the usage pressure. It should 

be used by making the necessary settings.

The device should never be operated without providing the necessary settings.

In the region where the device will be installed, the electricity distribution 

company has determined.Whether the electric current and the required electric 

current for the device to work are suitable must be checked.

In cases where it is not suitable, the device should never be operated.

Check whether the electric current is consistent in the area where the device will 

be installed. Should be done. If necessary, the electric current should be made 

consistent by using additional devices.

The device should never be operated before the electric current becomes consistent.

In the area where the device will be installed, the grounding line in the electrical 

connection suitability should be checked. Grounding line in areas where it is not 

suitable must be taken separately.

The device should never be operated in areas where the grounding line is not properly connected to the 

device.

5

www.daygas.eu